Download & Register

Register

* Required information

Thank You!

Your registration was successful.

Successful registration

The registration number has been sent to the email address you entered.

We strongly encourage you to register as a MITCalc user. You get the advantage of being regularly informed about new versions, new calculation modules, and extension packs. Please fill out the form and click the Register button.

Upon registration, you will be sent a confirmation email with your registration number.

Note: Your personal information is used only for communication between you and us and will never be shared with any third party.

Download

Free 30-day trial: Users have 30 days after installation to test the installed product with no restrictions. Trial versions are available for both the calculation package as well as for individual modules.

Any inquiries regarding installation and functions of the product may be addressed to: support@mitcalc.com

IMPORTANT: To ensure full compatibility with various Microsoft Excel versions, two different packages are available. One designed for older versions of MS Excel (2000/XP/2003/2007), and another compatible with MS Excel 2007 and later versions. Both MITCalc installation packages support MS Excel 2007. Click here for further information.

Please select your version of MS Excel before you proceed with downloading:

MITCalc Calculation Packages - version for MS Excel 2000, XP, 2003, 2007
MITCalc 2D

Set of all calculations, 2D CAD support *

ver 1.77 (06/20/2021) Download
MITCalc 3D for SolidWorks (2001Plus and higher)

Set of all calculations, link to SolidWorks, parametric models **

ver 1.77 (06/20/2021)

Download

MITCalc 3D for Autodesk Inventor (ver. 5.3 to ver. 2013)

Set of all calculations, link to Autodesk Inventor, parametric models **

ver 1.77 (06/20/2021)

Download

MITCalc 3D for Autodesk Inventor (ver. 2014 and higher)

Set of all calculations, link to Autodesk Inventor, parametric models **

ver 1.77 (06/20/2021)

Download

MITCalc 3D for Solid Edge (ver. 15 and higher)

Set of all calculations, link to Solid Edge, parametric models **

ver 1.77 (06/20/2021)

Download

MITCalc Calculation Packages - version for MS Excel 2007, 2010, 2013, 2016, 2019, 365
MITCalc 2D

Set of all calculations, 2D CAD support *

ver 1.77 (06/20/2021) Download
MITCalc 3D for SolidWorks (2001Plus and higher)

Set of all calculations, link to SolidWorks, parametric models **

ver 1.77 (06/20/2021)

Download

MITCalc 3D for Autodesk Inventor (ver. 5.3 to ver. 2013)

Set of all calculations, link to Autodesk Inventor, parametric models **

ver 1.77 (06/20/2021)

Download

MITCalc 3D for Autodesk Inventor (ver. 2014 and higher)

Set of all calculations, link to Autodesk Inventor, parametric models **

ver 1.77 (06/20/2021)

Download

MITCalc 3D for Solid Edge (ver. 15 and higher)

Set of all calculations, link to Solid Edge, parametric models **

ver 1.77 (06/20/2021)

Download

MITCalc for PTC Creo can be downloaded from COGRAS spol. s r.o.
Standalone calculations (2D support only)* - version for MS Excel 2000, XP, 2003, 2007
Beams, Shafts, Profiles
Straight Beams with a Constant Cross-section ver 1.25 (06/20/2021) Download
Shafts - Design, Deformation, Strength Test ver 1.28 (06/20/2021) Download
Profiles - Static Characteristics ver 1.24 (06/20/2021) Download
Slender Strut (column) Buckling ver 1.24 (06/20/2021) Download
Power Screw and Ball Screw ver 1.11 (06/20/2021) Download
Plates and Shells
Plates ver 1.19 (06/20/2021) Download
Shells ver 1.17 (06/20/2021) Download
Toothing
Spur Gear - External ver 1.27 (06/20/2021) Download
Spur Gear - Internal ver 1.24 (06/20/2021) Download
Spur Gear - Gear Rack ver 1.15 (06/20/2021) Download
Bevel and Hypoid Gears ver 1.24 (06/20/2021) Download
Worm Gear ver 1.22 (06/20/2021) Download
Epicyclic Gearing ver 1.21 (06/20/2021) Download
Belts and Chains
V-Belts ver 1.26 (06/20/2021) Download
Toothed Belts ver 1.25 (06/20/2021) Download
Roller Chains ver 1.25 (06/20/2021) Download
Multiple Pulley Transmission ver 1.25 (06/20/2021) Download
Brakes, Clutches, Flywheels
Friction Brakes and Clutches ver 1.10 (06/20/2021) Download
Bearings
Rolling Bearings I - SKF ver 1.24 (06/20/2021) Download
Rolling Bearings II - Inch ver 1.24 (06/20/2021) Download
Rolling Bearings III - INA/FAG ver 1.23 (06/20/2021) Download
Tolerances
Tolerances ver 1.24 (06/20/2021) Download
Tolerance Analysis ver 1.23 (06/20/2021) Download
Connections
Bolted Connection ver 1.28 (06/20/2021) Download
Shafts Connection using Keys and Splines ver 1.27 (06/20/2021) Download
Force Couplings of Shafts with Hubs ver 1.24 (06/20/2021) Download
Pinned Couplings ver 1.23 (06/20/2021) Download
Welded Connections ver 1.19 (06/20/2021) Download
Springs
Compression Spring ver 1.26 (06/20/2021) Download
Tension Spring ver 1.26 (06/20/2021) Download
Torsion Spring ver 1.26 (06/20/2021) Download
Springs - 15 Types ver 1.21 (06/20/2021) Download
Tools and Tables
Thermal Properties of Materials ver 1.11 (06/20/2021) Download
Technical Formulas, Aerodynamics, Ballistics ver 1.25 (06/20/2021) Download
Standalone calculations (2D support only)* - version for MS Excel 2007, 2010 and higher
Beams, Shafts, Profiles
Straight Beams with a Constant Cross-section ver 1.25 (06/20/2021) Download
Shafts - Design, Deformation, Strength Test ver 1.28 (06/20/2021) Download
Profiles - Static Characteristics ver 1.24 (06/20/2021) Download
Slender Strut (column) Buckling ver 1.24 (06/20/2021) Download
Power Screw and Ball Screw ver 1.11 (06/20/2021) Download
Plates and Shells
Plates ver 1.19 (06/20/2021) Download
Shells ver 1.17 (06/20/2021) Download
Toothing
Spur Gear - External ver 1.27 (06/20/2021) Download
Spur Gear - Internal ver 1.24 (06/20/2021) Download
Spur Gear - Gear Rack ver 1.15 (06/20/2021) Download
Bevel and Hypoid Gears ver 1.24 (06/20/2021) Download
Worm Gear ver 1.22 (06/20/2021) Download
Epicyclic Gearing ver 1.21 (06/20/2021) Download
Belts and Chains
V-Belts ver 1.26 (06/20/2021) Download
Toothed Belts ver 1.25 (06/20/2021) Download
Roller Chains ver 1.25 (06/20/2021) Download
Multiple Pulley Transmission ver 1.25 (06/20/2021) Download
Brakes, Clutches, Flywheels
Friction Brakes and Clutches ver 1.10 (06/20/2021) Download
Bearings
Rolling Bearings I - SKF ver 1.24 (06/20/2021) Download
Rolling Bearings II - Inch ver 1.24 (06/20/2021) Download
Rolling Bearings III - INA/FAG ver 1.23 (06/20/2021) Download
Tolerances
Tolerances ver 1.24 (06/20/2021) Download
Tolerance Analysis ver 1.23 (06/20/2021) Download
Connections
Bolted Connection ver 1.28 (06/20/2021) Download
Shafts Connection using Keys and Splines ver 1.27 (06/20/2021) Download
Force Couplings of Shafts with Hubs ver 1.24 (06/20/2021) Download
Pinned Couplings ver 1.23 (06/20/2021) Download
Welded Connections ver 1.19 (06/20/2021) Download
Springs
Compression Spring ver 1.26 (06/20/2021) Download
Tension Spring ver 1.26 (06/20/2021) Download
Torsion Spring ver 1.26 (06/20/2021) Download
Springs - 15 Types ver 1.21 (06/20/2021) Download
Tools and Tables
Thermal Properties of Materials ver 1.11 (06/20/2021) Download
Technical Formulas, Aerodynamics, Ballistics ver 1.25 (06/20/2021) Download

Installation Notes:

MITCalc is translated by an automatic translator for another 15 languages (ES, FI, HU, IT, JP, KO, NL, NO, PL, PT, RU, SK, SL, SV, TR). Every installation contains all translations.

*) Microsoft Excel (version XP, 2003, 2007, 2010, 2013, 2016, 2019, 365 ...) including VBA support (**and SolidWorks / Autodesk Inventror / Solid Edge) must be installed correctly for correct functioning of MITCalc calculations (A full installation of Microsoft Office is recommended).

*) The safety settings in MS Excel must be set to allow launching of embedded VBA applications.
MS Excel XP,2003: Excel ->Menu Tools->Macro->Security
MS Excel 2007: Office button->Excel Options->Trust Center->Trust Center Setting->Macro Settings
MS Excel 2010, 2013, 2016, 2019: Menu File->Excel Options->Trust Center->Trust Center Setting->Macro Settings

**) After the installation of MITCalc is completed, a macro will automatically launch an additional installation of a connection add-in into SolidWorks, Autodesk Inventor, or Solid Edge. Please enable the macro to run if you are prompted so. Installation of the connection into CAD system may also be started manually from the Start menu -> MITCalc -> SolidWorks / Inventor / Solid Edge Add-In Installation.